High Frequency FPV Video Transmitter 7.2G 4W VTX 64 Channels for Drone Image Transmission
1. Product parameters
Input voltage: DC IN 7V-36V, large and stable output power, long transmission distance;
Video format: PAL/NTSC
Transmit Power: 36 dBm ± 1dBm (MAX)
Power factor: 5 levels: 25 mW, 500mW, 800mW, 2.5 W, 4W;
Power adjustment: power adjustment button, POWER button switching
Transmitting frequency: 64 CH, see the frequency point table for details
Channel selection: frequency band/frequency point adjustment button: long press CHANNEL button to switch
frequency band, short press CHANNEL button to switch frequency point
Weight: 35g (with housing, without antenna)
Size (length, width and height): 44 * 29 * 16 mm
Antenna interface: SMA
2.Transmitter Operation Adjustment Section:
The led next to the CHANNAL button is used to display the frequency bands and frequency points. There are 10
frequency bands and 8 frequency points in total. Flicker the frequency band first, flicker once to represent the first
frequency band, and flicker twice continuously to represent the second frequency band. After that, the frequency
point flashes again at an interval of 1 second. One flash represents the first frequency point, two consecutive flashes
represent the second frequency point, and three consecutive flashes represent the third frequency point (and so on).
After that, the power enters the regular flash at an interval of 1 second.
The LED Light Next to the POWER Button Is Used to Display the Power, and There Are 5 Powers in Total.
Flashing Once Represents LEVEL1 Power, Flashing Twice Represents LEVEL2 Power, Flashing Three Times
Represents LEVEL3 Power, Flashing Four Times Represents LEVEL4 Power, Flashing Five Times Represents
LEVEL5 Power. After That, Enter the Regular Flicker of the Frequency Point of the Frequency Band at an Interval of
1 Second.
Transmitter CHANNAL key: short press the FM point and long press the FM band for 3 seconds. POWER
key: short press to adjust the power level.
3.Frequency Table:


