3.7-4.3G FPV VTX 3.7Ghz Video Transmitter 10W Long Range Image Transmission for RC Drone
I.Key Features
- None standard frequency from 3.7G to 4.3GHz for less congestion.
- Designed for long-range flights, up to 10W transmitting power, and provide multi-level adjustment.
- Efficient PA and power calibration to ensure power consistency across all channels.
- Customized digital PLL circuit, chip level integration, no frequency drift.
- Aluminum alloy three-layer shell structure and large centrifugal fan provide sufficient heat dissipation to ensure
stable output of transmitting power.
- 32 channels supports band switching within the 3.7–4.3 GHz range.
II.General Characteristics
Frequency band : 3700-4320MHz
Output power : PIT/2.5W/5W/7W/10W
Channel : 32 CH
Power Supply : DC 24-36V (2-8S)
Modulation : FM
Video input level : 1V±0.2Vp-p (typ.)
Control Protocol : IRC Tramp
S/N(For ±3MHz) : >55dBc
Frequency control : PLL
Frequency precision :±200KHz (Typ.)
Dimension : 58*36*16mm
Operating Temperature : -10℃~+70℃
Hole : 20*20mm
Weight : 36.8g
III.Frequency Table:
IV.Button Operation:
Channel select mode:
Short press channel button, enter CHANNEL setup, LED on and flash, select channel by short click.
Band select mode:
Continue press the button for 3s, enter BAND setup, LED on and flash, select band by short click.
Power select mode:
Short press power button, enter POWER setup, LED on and flash, select power by simple short presses.
For setup via the flight controller, connect the DATA pin and use the IRC Tramp protocol.
IIV.Attention:
Antenna must be connected before use! Otherwise there is a risk of damage to the product.
The product needs to be mounted reliably, avoiding vibration and high temperatures.
The product has a built-in power filter, but still need to avoid excessive power supply
interference.
Your message must be between 20-3,000 characters!