|
| Place of Origin: | China |
| Brand Name: | Kimpok |
| Certification: | CE |
| Model Number: | KP-12VTX1000M |
1.2Ghz 1W FPV High Power Wireless Video Transmitter and Receiver For Drone with 9 Channel
I.Specifications:
| Item | SPEC. |
| Frequency band | 1080-1360Mhz |
| Channel | 9 channels |
| Channel Frequency | 1080/1120/1160/1200/1240/1280/1320/1360/1258(MHz) |
| RF power | 0. 1mW / 25mW / 200mW / 1000mW |
| Audio Sub-carrier | 6.5MHz/6.0MHz |
| Modulation type | FM |
| Frequency control | PLL |
| Audio sub-carrier control | PLL |
| Frequency Stability | ±100KHz (Typ.) |
| Frequency precision | ±200KHz (Typ.) |
| A/V (Ratio) | -26±2dB |
| S/N(Fo±3MHz) | >70d Bc |
| Channel Carrier error | 1dB |
| Antenna Port | 50 Ohms |
| Input format | NTSC or PAL |
| Video input level | 1V±0.2Vp-p type |
| Audio input level | 1V±0.2Vp-p type |
| Operating Temperature | -10℃~+60℃ |
| Input power supply | DC 7-36V, supporting 2-8S battery input |
| Output voltage | DC 7-36V ; DC5V |
| Profile dimension | 36*27*4mm |
| Net weight | 4.3g |
II. Interface definition
1. The antenna type is SMA: The antenna head is "external thread + hole", and the antenna rod is "internal thread + needle". It is equipped with a 1.2Ghz special customized "Y" antenna.
2. 7P 1.25 Wiring Interface: Red: 7-36V IN
Black: GND (input ground) Yellow: Video input
White: 6.5M audio input
Green: 7-36V output
Blue: GND (output ground) Purple: 5V output
III.Precautions for Use
1. A certain space shall be reserved when the image transmission module is installed to ensure the air convection around the module and module cooling; otherwise, if the overheating protection of the module is started, the power emission will be lowered and even closed.
2. It is suggested to ensure correct voltage scope and correct positive and negative anodes before powering-on to avoid element burning-out.
3. It is suggested to confirm antenna has been installed at the RF output terminal before powering-on to extend the service life of module.
4. Please read the Instruction before use to ensure correct wiring and extend the service life of module.
IV:Packing List
1. VTX module 1pc;
2. “Y” type antenna 1pc;
3. 7P 1.25 single head cable 1pc.
Video
Video
